<?xml version="1.0" encoding="gb2312"?>
<rss version="2.0">
<channel>
<title>Linux</title>
<link>http://unixreference.net/articles/linux/index.html</link>
<description>Linux</description>
<language>zh-cn</language>
<generator>Copyright(c) 2001-2007 OLDHAND ORGANIZATION, All Rights reserved. &lt;br/&gt;&lt;a href='http://www.dedecms.com' target='_blank'&gt;Power by DedeCms 织梦内容管理系统&lt;/a&gt;</generator>
<webmaster>webmaster@unixreference.net</webmaster>
<item>
    <title>向嵌入式Linux移植实时设备驱动程序</title>
    <link>http://unixreference.net/articles/linux/driver/2007/0305/647.html</link>
    <description></description>
    <pubDate>2006-09-28</pubDate>
    <category>设备驱动</category>
    <author>Bill Weinberg</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>嵌入式Linux平台的多协议路由器的设计</title>
    <link>http://unixreference.net/articles/linux/embedded/hw/2007/0305/646.html</link>
    <description>传统的无线移动网络通常以固定的基础设施为支撑，无法满足人们对日益增长的通信业务的要求，一种新型的无线网络——AdHoc网络应运而生。Ad Hoc网络又称移动自组网、多跳网络，具备细网灵活、快捷，不受有线网络的影响等特点，可广泛应用于军事和救援等无法或不便预先铺</description>
    <pubDate>2006-09-26</pubDate>
    <category>硬件设计</category>
    <author>朱雅琼 李建东 盛敏</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>嵌入式Linux操作系统CGI程序设计技术</title>
    <link>http://unixreference.net/articles/linux/embedded/hw/2007/0305/645.html</link>
    <description></description>
    <pubDate>2006-09-26</pubDate>
    <category>硬件设计</category>
    <author>郑伟 徐荣华 王钦若</author>
    <comments>www.gd-emb.org</comments>
</item>
<item>
    <title>基于Linux的嵌入式网络存储器设计</title>
    <link>http://unixreference.net/articles/linux/embedded/hw/2007/0305/644.html</link>
    <description>随着现代信息社会的高速发展，各种类型的数据也呈几何指数级地增长，如何更有效、更方便、更完全地存取管理这些数据，成为人们关注的一个问题。新的网络存储技术的出现，给了人们一个很好的解决方案。它把存储设备直接连接到网络上，作为一个瘦的网络客户终端设备给用户</description>
    <pubDate>2006-09-27</pubDate>
    <category>硬件设计</category>
    <author>范莉莉 田庆华</author>
    <comments>单片机及嵌入式系统应用</comments>
</item>
<item>
    <title>基于嵌入式Linux的智能手机系统设计</title>
    <link>http://unixreference.net/articles/linux/embedded/hw/2007/0305/643.html</link>
    <description>介绍以MotorolaMX1作为中央处理器、Wavecom公司的Q2403A作为无线收发模块、嵌入式 Linux作为操作系统的智能手机系统的设计与实现。该设计可以实现GSM语音通信、GPRS上网及PDA相关应用软件等功能，具有结构清晰、易于开发等优点。</description>
    <pubDate>2005-06-24</pubDate>
    <category>硬件设计</category>
    <author>中国科技大学研究生院 谭 磊</author>
    <comments>赛迪网</comments>
</item>
<item>
    <title>恰当选择嵌入式Linux环境下的GUI系统</title>
    <link>http://unixreference.net/articles/linux/embedded/gui/2007/0305/642.html</link>
    <description>在嵌入式系统领域，有不少GUI系统，如QNX Photon MicroGUI等，可是具体到嵌入式Linux领域又有哪些可供选择的GUI系统呢？</description>
    <pubDate>2005-09-19</pubDate>
    <category>GUI</category>
    <author>刘锬</author>
    <comments>计算机世界</comments>
</item>
<item>
    <title>嵌入式Linux系统的MiniGUI研究和移植</title>
    <link>http://unixreference.net/articles/linux/embedded/gui/2007/0305/641.html</link>
    <description></description>
    <pubDate>2006-09-28</pubDate>
    <category>GUI</category>
    <author>闫玉忠</author>
    <comments>单片机及嵌入式系统应用</comments>
</item>
<item>
    <title>揭示恶意的Linux内核模块是如何工作</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0304/632.html</link>
    <description>本文将揭示恶意的内核模块如何工作，并且给出一些我开发的对付此类入侵的工具。</description>
    <pubDate>2007-03-01</pubDate>
    <category>内核</category>
    <author>shenyuan</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>介绍几种Linux备份方法便于日常管理</title>
    <link>http://unixreference.net/articles/linux/management/2007/0304/630.html</link>
    <description>系统备份是系统管理工作中十分重要的一个环切，本文详细介绍了各种Linux系统的备份方法，相信对大家的日常管理工作有所帮助。</description>
    <pubDate>2007-03-02</pubDate>
    <category>系统管理</category>
    <author>jinyuan</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>利用FAM和IMON在Linux下实现数据复制</title>
    <link>http://unixreference.net/articles/linux/management/2007/0304/629.html</link>
    <description>在本文中我们将要讨论的是，如何抛开昂贵的 SAN（存贮区域网络Storage Area Network，如全球文件系统GFS）或网络块设备在Linux下实现数据复制。我们在复制系统中采用了FAM（文件变更监视模块）和IMON（信息节点监视模块），这两个系统都是SGI当初为IRIX开发的。</description>
    <pubDate>2007-03-02</pubDate>
    <category>系统管理</category>
    <author>Atif Ghaffa</author>
    <comments>linuxaid.com</comments>
</item>
<item>
    <title>教你用APF和BFD来加强Linux的防火墙</title>
    <link>http://unixreference.net/articles/linux/security/firewall/2007/0304/628.html</link>
    <description>本文主要讲述用APF和BFD来加强Linux防火墙，BFD: （穷举破解侦测），与APF: （高级规则防火墙），均是由 Rf-x Networks 出品的Linux安全工具。</description>
    <pubDate>2007-03-02</pubDate>
    <category>Firewall</category>
    <author>gaoxing</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>Linux下ARM/DSP双核系统通信接口设计</title>
    <link>http://unixreference.net/articles/linux/embedded/hw/2007/0304/626.html</link>
    <description></description>
    <pubDate>2007-01-31</pubDate>
    <category>硬件设计</category>
    <author>刘斌 李仲阳</author>
    <comments>中国电子设计网</comments>
</item>
<item>
    <title>基于Linux的移动电话开发技术及前景</title>
    <link>http://unixreference.net/articles/linux/embedded/2007/0304/625.html</link>
    <description>文章详细阐述了基于Linux的移动电话开发的各种技术问题，涉及到关键的Linux技术和支持电话开发开源项目的可用性和成熟性。另外，文章还讨论了移动运营商提出的技术和经济层面的问题。</description>
    <pubDate>2007-01-25</pubDate>
    <category>嵌入式系统</category>
    <author>何小庆 比尔.温伯格</author>
    <comments>bmrtech.com</comments>
</item>
<item>
    <title>制作基于软盘的Linux系统</title>
    <link>http://unixreference.net/articles/linux/embedded/2007/0303/624.html</link>
    <description>将Linux系统裁减到就像DOS一样只要一张软盘就能启动，是制作嵌入式Linux的基础。网络上有许多实现方法的介绍，但是在实践过程中都或多或少存在着一些问题或不方便之处。我们结合自己在这方面的实践经验，详细介绍基于软盘的Linux系统制作过程。</description>
    <pubDate>2001-07-26</pubDate>
    <category>嵌入式系统</category>
    <author>张宏伟 欧阳平平</author>
    <comments>塞迪网</comments>
</item>
<item>
    <title>嵌入式uClinux的内核结构和开发环境</title>
    <link>http://unixreference.net/articles/linux/embedded/uclinux/2007/0303/623.html</link>
    <description>在此主要对uClinux的进行介绍，嵌入式uClinux操作系统主要有三个基本部分组成：引导程序、uClinux内核（由内存管理、进程管理和中断处理等构成）和文件系统。</description>
    <pubDate>2007-01-15</pubDate>
    <category>uCLinux</category>
    <author>52RD.com</author>
    <comments>52RD.com</comments>
</item>
<item>
    <title>基于 GTK+ 和 X-window 的 GUI 在嵌入式 Linux 中的应用</title>
    <link>http://unixreference.net/articles/linux/embedded/gui/2007/0303/619.html</link>
    <description>在嵌入式 Linux 下有很多图形界面系统 GUI，包括 Qt/Embedded，FLTK，Microwindows 和 GTK+ 等。作为一个开发者，到底使用什么样的 GUI 系统呢？对一个系统，将它改造为符合你的需求，你要做多少修改呢？修改后的系统的尺寸一般会有多大呢？这些都是开发人员会遇到的问</description>
    <pubDate>2006-12-07</pubDate>
    <category>GUI</category>
    <author>余涛 (yut616@21cn.com)</author>
    <comments>IBM Developerworks</comments>
</item>
<item>
    <title>主流嵌入式Linux系统下GUI解决方案</title>
    <link>http://unixreference.net/articles/linux/embedded/gui/2007/0303/618.html</link>
    <description>本文介绍一下现存的主流嵌入式Linux下GUI解决方案。</description>
    <pubDate>2007-02-12</pubDate>
    <category>GUI</category>
    <author>linuxaid</author>
    <comments>linuxaid</comments>
</item>
<item>
    <title>基于Qt/Embedded和Qtopia的GUI设计</title>
    <link>http://unixreference.net/articles/linux/embedded/gui/2007/0302/617.html</link>
    <description>介绍了Qt/Embedded和Qtopia的体系结构及其交叉编译过程与安装过程，重点讲述了如何实现Qt/Embedded下的应用程序以及如何将应用程序移植到Qtopia桌面系统。本文介绍的方法在笔者的开发平台上都做过验证。</description>
    <pubDate>2007-03-02</pubDate>
    <category>GUI</category>
    <author>王丽洁 习勇 魏急波</author>
    <comments>http://www.mct.com.cn</comments>
</item>
<item>
    <title>Linux环境进程间通信(二): 信号(上)</title>
    <link>http://unixreference.net/articles/linux/programming/IPC/2007/0228/612.html</link>
    <description>linux信号机制远远比想象的复杂，本文力争用最短的篇幅，对该机制做了深入细致的分析。读者可以先读一下信号应用实例（在信号（下）中），这样可以对信号发送直到相应的处理函数执行完毕这一过程有个大致的印象。本文尽量给出了较新函数的应用实例，着重说明这些的功能</description>
    <pubDate>2003-01-01</pubDate>
    <category>进程间通讯</category>
    <author>郑彦兴</author>
    <comments>IBM Developerworks</comments>
</item>
<item>
    <title>深刻理解Linux进程间通信(IPC)</title>
    <link>http://unixreference.net/articles/linux/programming/IPC/2007/0228/611.html</link>
    <description>本系列文章阐述了Linux环境下的几种主要进程间通信手段，并针对每个通信手段关键技术环节给出详细实例。为达到阐明问题的目的，本文还对某些通信手段的内部实现机制进行了分析。</description>
    <pubDate>2002-12-11</pubDate>
    <category>进程间通讯</category>
    <author>郑彦兴</author>
    <comments>IBM Developerworks</comments>
</item>
<item>
    <title>Linux环境进程间通信: 管道及有名管道</title>
    <link>http://unixreference.net/articles/linux/programming/IPC/2007/0228/610.html</link>
    <description>管道和有名管道是最早的进程间通信机制之一，管道可用于具有亲缘关系进程间的通信，有名管道克服了管道没有名字的限制，因此，除具有管道所具有的功能外，它还允许无亲缘关系进程间的通信。</description>
    <pubDate>2002-12-11</pubDate>
    <category>进程间通讯</category>
    <author>郑彦兴</author>
    <comments>IBM Developerworks</comments>
</item>
<item>
    <title>Linux操作系统下信号与进程控制解析</title>
    <link>http://unixreference.net/articles/linux/management/2007/0228/609.html</link>
    <description>由于职责的要求，你不得不费力地阅读那些令你感到费解的晦涩的Linux应用程序的说明文件。然后，你将运行指令和编辑设置文件。一切都在正常运行，生活真美好。但是，你知道，好时光不会永远持续下去。当你遇到令人恐惧的“send the process a SIGHUP”提示时，好时光结束</description>
    <pubDate>2007-02-28</pubDate>
    <category>系统管理</category>
    <author>jinkong</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>用Linux系统引导CD为服务器排忧解难</title>
    <link>http://unixreference.net/articles/linux/management/2007/0228/608.html</link>
    <description>系统崩溃引起的服务中断会给用户带来巨大的经济损失，但如果使用合适的工具则可以尽快恢复系统，把损失降到最低限度。尽管Linux系统以稳定可靠著称，但由于硬件问题有时仍会崩溃/或无法引。针对这一问题，最好的解决办法就是使用Linux系统引导CD。</description>
    <pubDate>2007-02-28</pubDate>
    <category>系统管理</category>
    <author>秩名</author>
    <comments>UNIX REFERENCE</comments>
</item>
<item>
    <title>如何使用Linux脚本对无线网络进行管理</title>
    <link>http://unixreference.net/articles/linux/wangluo/2007/0228/607.html</link>
    <description>为您的办公室或邻居设置一个无线的 Internet 服务提供者（WISP）并不需要繁重的劳动或昂贵的投资。如果您使用一些很容易购买到的设备和 Linux&amp;#8482; 来构建网络，那么可以利用 shell 脚本的强大功能来简化网络的管理。本文将提供一些您所需要的技巧和脚本。</description>
    <pubDate>2007-02-28</pubDate>
    <category>网络</category>
    <author>sayan</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>BabyLinux操作系统的制作过程(下)</title>
    <link>http://unixreference.net/articles/linux/misc/2007/0228/606.html</link>
    <description>BabyLinux不是一个完整的发行版，它是利用原有的一套完整的Linux系统的内核原代码和编译工具，利用busybox内建的强大功能，在一张软盘上做的一个很小的Linux系统。它具备一个Linux系统的基本特征，支持Linux系统最常用的一百多个命令，支持多种文件系统，支持网络等等。</description>
    <pubDate>2007-01-24</pubDate>
    <category>Misc</category>
    <author>GuCuiwen</author>
    <comments>ChinaITLab</comments>
</item>
<item>
    <title>BabyLinux操作系统的制作过程(上)</title>
    <link>http://unixreference.net/articles/linux/misc/2007/0228/605.html</link>
    <description>BabyLinux不是一个完整的发行版，它是利用原有的一套完整的Linux系统的内核原代码和编译工具，利用busybox内建的强大功能，在一张软盘上做的一个很小的Linux系统。它具备一个Linux系统的基本特征，支持Linux系统最常用的一百多个命令，支持多种文件系统，支持网络等等。</description>
    <pubDate>2007-01-22</pubDate>
    <category>Misc</category>
    <author>GuCuiwen</author>
    <comments>ChinaITLab</comments>
</item>
<item>
    <title>打造适合自己Slackware机器的内核</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0226/603.html</link>
    <description>在本文我们以Slackware的current的test内核来简要的说明应用slackware的官方资源的好处，以及顺便也解决一下大内存支持的问题。</description>
    <pubDate>2007-01-16</pubDate>
    <category>内核</category>
    <author>北南南北</author>
    <comments>Linuxsir</comments>
</item>
<item>
    <title>自己动手做一个最小的Linux kernel</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0222/601.html</link>
    <description>Linux 能有多小呢 ? 每一个做 embedded 系统的人都把小看成第一要务，其实这是不对的。小当然不会比较坏，但不一定比较好。如果系统使用 4MB 和 5MB 没有价格或性能上的差别，那 4MB 和 5MB 是一样好的。</description>
    <pubDate>2006-12-18</pubDate>
    <category>内核</category>
    <author>saiyuan</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>简单编译升级内核激活FC1上的USB硬盘</title>
    <link>http://unixreference.net/articles/linux/driver/2007/0222/600.html</link>
    <description></description>
    <pubDate>2006-08-16</pubDate>
    <category>设备驱动</category>
    <author>moo</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>一个Linux爱好者的2.6.11内核编译过程</title>
    <link>http://unixreference.net/articles/linux/kernel/2.6/2007/0221/599.html</link>
    <description></description>
    <pubDate>2005-09-19</pubDate>
    <category>2.6</category>
    <author>IHH</author>
    <comments>Linux公社</comments>
</item>
<item>
    <title>定制Linux系统内核，发挥Linux潜能</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/598.html</link>
    <description>对Linux系统内核进行定制和修改并不向很多人想象中的那么复杂。如果用户能够根据自己的实际情况对Linux系统内核进行合理的修改，可以有效的简化Linux内核，去除不需要的组件，从而提供更快的系统启动速度，释放更多的内存资源。</description>
    <pubDate>2006-11-07</pubDate>
    <category>内核</category>
    <author>gegr</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>如何编译一个操作系统内核-Ubuntu方式</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/597.html</link>
    <description></description>
    <pubDate>2006-12-04</pubDate>
    <category>内核</category>
    <author>heyaun</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>重新编译Linux操作系统的内核指南</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/596.html</link>
    <description>Linux的一个重要的特点就是其源代码的公开性，全世界任何一个软件工程师都可以将自己认为优秀的代码加入到其中，由此引发的一个明显的好处就是Linux修补漏洞的快速以及对最新软件技术的利用。而Linux的内核则是这些特点的最直接的代表。</description>
    <pubDate>2007-01-08</pubDate>
    <category>内核</category>
    <author>shaying</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>快速编译Linux内核需要的模块方法介绍</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/595.html</link>
    <description></description>
    <pubDate>2007-01-05</pubDate>
    <category>内核</category>
    <author>未知</author>
    <comments>IBM</comments>
</item>
<item>
    <title>编译内核以使其支持PS并口改装手柄</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/594.html</link>
    <description></description>
    <pubDate>2007-01-08</pubDate>
    <category>内核</category>
    <author>未知</author>
    <comments>www.linuxfans.org</comments>
</item>
<item>
    <title>编译支持NTFS的Linux系统内核模块</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/593.html</link>
    <description>传统编译内核模块的方法繁琐而费时，本文将告诉我们一种快速编译所需要内核模块的新方法。</description>
    <pubDate>2007-02-21</pubDate>
    <category>内核</category>
    <author>刘军民</author>
    <comments>altmayer.dhs.org</comments>
</item>
<item>
    <title>配置、编译Linux系统内核的实用工具</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/592.html</link>
    <description>配置与编译内核用到的工具很多，在这里只对几个关键工具进行介绍，更多的内容请参考相关手册。</description>
    <pubDate>2007-01-08</pubDate>
    <category>内核</category>
    <author>konmgwu</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>让你的Linux内核重编译之路走得更通畅</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/591.html</link>
    <description></description>
    <pubDate>2007-01-12</pubDate>
    <category>内核</category>
    <author>yuanjin</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>Linux操作系统的内核编译详细步骤</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/590.html</link>
    <description></description>
    <pubDate>2007-01-15</pubDate>
    <category>内核</category>
    <author>blainelinar</author>
    <comments>网易社区</comments>
</item>
<item>
    <title>Linux操作系统的内核编译内幕详解</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/589.html</link>
    <description></description>
    <pubDate>2005-09-21</pubDate>
    <category>内核</category>
    <author>IHH</author>
    <comments>赛迪网开发者论坛</comments>
</item>
<item>
    <title>Linux基础知识：内核编译-内核管理概述</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/588.html</link>
    <description></description>
    <pubDate>2006-09-12</pubDate>
    <category>内核</category>
    <author>北南南北</author>
    <comments>LinuxSir.Org</comments>
</item>
<item>
    <title>教你一招，给Linux内核补IPVS补丁</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/587.html</link>
    <description></description>
    <pubDate>2007-01-09</pubDate>
    <category>内核</category>
    <author>ChinaITLab</author>
    <comments>ChinaITLab</comments>
</item>
<item>
    <title>基于Linux系统核心的汉字显示的尝试</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/586.html</link>
    <description></description>
    <pubDate>2006-12-12</pubDate>
    <category>内核</category>
    <author>syn</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>调整内核网络参数提高Linux系统安全</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/585.html</link>
    <description>本文主要介绍了linux系统位于目录/proc/sys/net/ipv4/下的部分内核网络参数，同时对通过linux内核网络参数的调整来提高linux系统的安全性和稳定性提出了自己的见解。从而为系统管理员进一步增强网络的安全性和系统的稳定性提供了参考。</description>
    <pubDate>2007-01-12</pubDate>
    <category>内核</category>
    <author>hitase</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>精华：升级Linux操作系统内核奋斗记</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/584.html</link>
    <description>我的PIII Dell机运行着内核2.4.的RedHat，自从Linux内核2.6发布以来一直想把该系统升级到内核2.6。经过一番艰辛万苦，终于成功了。为了体验一下在Linux下编写多线程程序的步骤，又更新GCC和C语言库。在此愿和各位朋友共享这段经历，共享这段成果。（可能有记录错误，仅</description>
    <pubDate>2006-11-24</pubDate>
    <category>内核</category>
    <author>yuanlaini</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>关于Linux操作系统的内核重入的分析</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/583.html</link>
    <description>对于Linux内核重入我做了一下一些分析。</description>
    <pubDate>2007-01-12</pubDate>
    <category>内核</category>
    <author>linuxforum</author>
    <comments>linuxforum</comments>
</item>
<item>
    <title>Linux操作系统下如何写一个Module</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/582.html</link>
    <description></description>
    <pubDate>2006-12-26</pubDate>
    <category>内核</category>
    <author>yusnahsg</author>
    <comments>赛迪网技术社区</comments>
</item>
<item>
    <title>轻松自如的装卸Linux系统内核模块</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/581.html</link>
    <description>按需动态装载模块可以使内核保持最小, 并更具灵活性。</description>
    <pubDate>2007-01-12</pubDate>
    <category>内核</category>
    <author>中国IT实验室</author>
    <comments>中国IT实验室</comments>
</item>
<item>
    <title>使用GDB与QEMU调试内核时的问题分析</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/580.html</link>
    <description>使用QEMU+GDB能够实现源代码级的内核调试，但是，存在一个问题──当内核允许中断时，单步命令（n与s）会进入时钟中断。</description>
    <pubDate>2006-10-26</pubDate>
    <category>内核</category>
    <author>fenghua</author>
    <comments>linux宝库</comments>
</item>
<item>
    <title>Linux内核编译菜单中相关选项的意义</title>
    <link>http://unixreference.net/articles/linux/kernel/2007/0221/579.html</link>
    <description></description>
    <pubDate>2006-09-19</pubDate>
    <category>内核</category>
    <author>sky</author>
    <comments>Unlinux</comments>
</item>

</channel>
</rss>
